Smoke Density Measuring Device Smoke Density Tester Equipment GA-9023

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: GA-9023
• Transport Package: Plywood Case
• Specification: 1000*900 *1310mm
• Trademark: GONOAVA
• Origin: Hunan
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Smoke Density Measuring Device Smoke Density Tester Equipment GA-9023
Introduction:
In accordance with GB/T17651.1~2, IEC61034-1~2 "cable or optical cable burning under specific conditions of smoke density determination" part 1 "test equipment" and part 2 "test procedures and requirements".The measurement of smoke density is an important aspect to evaluate the combustion characteristics of cable or optical cable, which is related to the evacuation of personnel and the determination of whether close to fire extinguishing.This instrument is mainly used to determine the smoke concentration of the cable and optical cable when burning under specific conditions, and to verify the smoke density.In the flame combustion or flameless combustion conditions, transmittance is used as a comparison of different cables or optical cable under specific conditions of a determination.

Principle:
The smoke density light measurement system for cable or optical cable burning under specific conditions consists of a light source, a silicon photocell, a light source receiver and a computer system.The light generated by the light source passes through the smoke density laboratory of 3m×3m×3m, and forms a uniform beam with a diameter of 1.5m±0.1m on the wall opposite the light source. A photocell installed at the center of the beam detects the intensity of the beam from the light source.When a large amount of smoke is generated in the combustion chamber due to the burning cable or optical cable, the smoke absorbs part of the photoelectricity, and the beam intensity of the silicon photocell is weakened. By processing the data through the computer system, It can be calculated that the transmittance with linear response is 100% relative to the initial transmittance.
Three, the design of the combustion chamber, take two ways for customers to choose: the first kind of brick wall, our company to promote the design scheme, send professional engineers on-site construction guidance;The second is fixed on an Angle iron bracket with a suitable material and constitutes the entire cubic combustion chamber.

Smoke Density Measuring Device Smoke Density Tester Equipment GA-9023
Features:
The instrument involves mechanical, optical, electronic three aspects of professional knowledge, is the integration of mechanical and electrical products, has the advantages of reasonable structure, stable performance, easy operation;Windows XP operation interface, LabVIEW style, perfect security mechanism.During the test, the measurement results can be displayed in real time and the perfect curve can be drawn dynamically (displaying the transmission rate and time curve). The data can be permanently saved, read and printed out, and the report can be printed directly.
Measurement software: it is in Windows XP+VB6.0 operation interface, can test the main data smoke optical density, specific optical density, smoke generation rate, maximum smoke generation rate, average smoke density, etc.Also has the calibration, editing, testing, parameter adjustment and other operation interface.The program adopts computer automatic control, collection, record and result settlement.


Smoke Density Measuring Device Smoke Density Tester Equipment GA-9023
Detailed technical parameters:
1. Combustion chamber: inner size: 3M× 3M× 3M, a total of 27 cubic meters.Can be brick wall structure, also can be steel plate structure, by the customer's choice.
2, light measuring device: A, light source imported quartz halogen lamp: nominal power 100W, nominal voltage: 12V, nominal light return: 2000-3000LM
B. Receptor: silicon photocell, light transmittance of 0% is no light through, light transmittance of 100% light without blocking completely through.
3. Standard ignition source: A. The ignition source is 1.0L alcohol
B. Alcohol plate: stainless steel, bottom side 210×110mm,
Top surface 240×140mm, height 80mm
4. Mixing of smoke: the use of desktop fans to make the smoke evenly distributed in the combustion chamber.
5. Blank test: burn the alcohol lamp to make the temperature of the combustion chamber reach 25±5ºC.
6, temperature measuring device: in the door surface from the ground height of 1.5m,
A temperature sensor is installed 0.5M away from the wall.
7, including a set of transmittance measurement software, can output curves and reports.
8, including a computer (printer)
9, power: 220V, 4KW.(The total power of the equipment should be indicated)
10, (smoke density) 0-924 six automatic shift gear
11. Measuring range: 0.0001 -- 100%;
12, measuring accuracy: + 3%;
13. Working voltage: 200-240V 50HZ;
14, ambient temperature: room temperature - 40ºC
15, relative temperature: ≤85%;
16, working environment: when the instrument is running, should avoid direct light, and there is no forced air flow phenomenon.

Other parameters and introduction:
1, the front door is installed with a window and can block the inspection of the activities of the opaque screen
2. The bottom of the square box is provided with an automatic ignition device, and the top is provided with an internal pressure regulating device
3, light source: 12V incandescent lamp, optical wavelength of 400 ~ 750nm
4, Receptor: for silicon photocell, light transmittance 0% for no light through, light transmittance 100% light without blocking completely through.
5. Combustion system: composed of pressure regulator valve, filter, regulating valve flowmeter and burner.
6. Burner: composed of igniter and alcohol plate, placed in the center of the sample.

Smoke Density Measuring Device Smoke Density Tester Equipment GA-9023
Equipment composition:
The whole instrument is composed of closed test chamber, photometer measuring system, alcohol plate, combustion system, igniter, test box, cable bracket, thermometer table and smoke density testing software;The circuit is developed by single chip microcomputer with high technical content and stable performance.This instrument is suitable for all cables, and is widely used in production plants and scientific research and testing units of wire and cable industry.The test chamber is a test cube with a volume of 27m3.