STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | GA-1001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm |
| Outlet length | 8.000±0.025mm |
| Temperature range | Room Temperature~450ºC |
| Temperature fluctuation | ±0.2 ºC |
| Temperature uniformity | ±1ºC |
| Temperature display resolution | 0.1ºC |
| Display resolution | 0.1ºC |
| Time display resolution | 0.1s |
| Displacement accuracy | 0.001mm |
| Volume timing accuracy | 0.001s |
| Testing scope of mass method | 0.1-150g/10min |
| Range of test results by volumetric method | 50-5000cm³/10min |
| Weight parameters are as follows: | |
| Weight accuracy | ±0.5% |
| Basic configuration |
A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min. |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
| Output mode | Micro-automatic print output |
| Cut material methods | Hand and Automatic Cut |
| Test load | Eight sets of weights |
| Power | AC220V±10% 50/60HZ |
| No | Name | Qty | Remark |
| 1 | Weight | 1 set | 0.325kg,0.875kg,1.835kg,2.5kg,2.915kg,3.475kg,4.615kg,5.0kg |
| 2 | Weight tray | 1pcs | Within level 1 load |
| 3 | Charging hopper | 1pcs | |
| 4 | Mouth mold cleaning rod | 1pcs | |
| 5 | Charging bar | 1pcs | |
| 6 | Cylinder cleaning rod | 1pcs | |
| 7 | piston rod | 1pcs | |
| 8 | mouth mold | 1pcs | |
| 9 | gauze | 2roll | |
| 10 | Print paper | 2 roll |
| Melt flow rate (g/10min) | Sample quality in charging barrel (g) | Extrudate cutting-off interval time (s) |
| 0.1-0.5 | 3-5 | 240 |
| >0.5-1 | 4-6 | 120 |
| >1-3.5 | 4-6 | 60 |
| >3.5-10 | 6-8 | 30 |
| >10 | 6-8 | 5-15 |
1. If this experiment value is less than 0.1 g / 10 min or greater than 100 g / 10 min, suggest you melt flow rate 2. When the material density is greater than 1.0 g / 10 min, may need to increase the sample size. 3. With more than 25 g / 10 min. Measuring MFR of material, in order to obtain enough reproducibility, may need to cut the time interval of less than 0.1 s for automatic control and measurement, or use method B. |
||
| Material | Test temperatureθ,ºC | Standard load mnom,kg |
| PS | 200 | 5.00 |
| PE | 190 | 2.16 |
| PE | 190 | 0.325 |
| PE | 190 | 21.60 |
| PE | 190 | 5.00 |
| PP | 230 | 2.16 |
| ABS | 230 | 10.00 |
| PS-1 | 200 | 5.00 |
| E/VAC | 150 | 2.16 |
| E/VAC | 190 | 2.16 |
| E/VAC | 125 | 0.325 |
| SAN | 220 | 10.00 |
| ASA,ACS,AEC | 220 | 10.00 |
| PC | 300 | 1.2 |
| PMMA | 230 | 3.8 |
| PB | 190 | 2.16 |
| PB | 190 | 10.00 |
| POM | 190 | 2.16 |
| MABS | 220 | 10.00 |
){kind=link}