DRL-II Thermal conductivity tester Ceramic thermal conductivity meter ASTM D5470

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: DRL-II
• Type: Thermal conductivity tester
• Weight: 5KG
• Power Source: AC220V
• test accuracy: better than 3%
• Transport Package: Plywood Case
• Specification: 380x width 400x height 165 (mm),
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

DRL-II Thermal conductivity tester Ceramic thermal conductivity meter  ASTM D5470
1.Product introduction
DRL-II thermal conductivity tester mainly test thin thermal conductor, silica gel, silicone rubber, solid electrical insulation materials, thermal conductivity silica gel, thermal conductivity resin, beryllium oxide porcelain, ceramic substrate, ceramic substrate, other aluminum substrate, aluminum substrate, alumina porcelain and other ceramic thermal conductivity measurement. The detection material is solid sheet, and the enclosed frame can detect powder state material and paste material.

Instrument reference standard: MIL-I-49456A (insulation sheet, heat conductive resin, heat conductive glass fiber reinforcement); GB 5598--2015 (beryllium oxide porcelain thermal conductivity determination method); ASTM D5470-2017 (Test standard for Heat transfer Performance of Thin Thermally Conductive Solid Electrical Insulating Materials), etc. Widely used in colleges and universities, scientific research institutions, quality inspection departments and production plants of material analysis and testing.

Product Parameters

DRL-II Thermal conductivity tester Ceramic thermal conductivity meter  ASTM D5470
2. Product Parameter

sample size	≤Φ30mm
sample thickness	0.02 ~ 20mm
thermal pole temperature control range	room temperature ~ 299.99ºC, temperature control accuracy 0.01ºC
cold pole temperature control range	0 ~ 99.00ºC, temperature control accuracy 0.01ºC
thermal conductivity test range	0.01 ~ 50W/m*k, 0.1 ~ 300W/m*k
thermal resistance test range	0.05 ~ 0.000005m2*K/W
test accuracy	better than 3%

the sample can be tested in the vacuum state to ensure the test environment and accuracy, vacuum 0.1MPa.
thermal conductivity tester test method: a. Material thermal conductivity test. b. Contact thermal resistance test.
computer automatic test, and realize data printing output.

Detailed Photos