ISO 4624 ASTM D 4541 Pull Type Adhesion Tester Meter Tests Instrument Ga-6024

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: GA-6024
• Type: Pull Type Adhesion Tester
• Weight: 10kg
• Power Source: AC220V
• Standards: ISO 4624
• Transport Package: Plywood Case
• Specification: 300*300*400mm
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

ISO 4624 ASTM D 4541 Pull Type Adhesion Tester Meter Tests Instrument GA-6024
1.Test Standard
The pull-type adhesion meter conforms to the standard requirements of GB/T 5210, ISO 4624 and ASTM D 4541.

ISO 4624 ASTM D 4541 Pull Type Adhesion Tester Meter Tests Instrument GA-6024
2.Product Description
The adhesion of the coating with the substrate can be quantified by the use of the open method, which means that the external force of the coating from the substrate to a specific area is required to be expressed by Mpa.
Its measuring principle is as follows: first round forging die by glue and adhesive coating on the surface under test, after a period of maintenance, through measuring instrument installed inside a spring places a lift to the circular forging die.When the circular forging die is pulled off the surface of the coating, the indicator on the scale shows the value of the adhesion of the coating to the substrate.
The instrument is operated by hand and is mainly used for construction site determination, especially in engineering acceptance.The application range includes the detection of deck coatings or spraying, stainless steel, aluminum products or coatings on concrete.

ISO 4624 ASTM D 4541 Pull Type Adhesion Tester Meter Tests Instrument GA-6024
3.Main technical parameters

Material	Anodized aluminum fuselage, steel base
Standard configuration	Pull-type adhesion tester, die (20), Araldite 1 box, pedestal support ring, magnetic forging die clip, forging die cutter, ratchet wrench (limited to range 3&4), suitcase and operation manual

4.Order Information
NO-1   Measure Range:0-3.5Mpa
NO-2   Measure Range:0-7.0Mpa
NO-3   Measure Range:0-15Mpa
NO-4   Measure Range:0-22Mpa
NO-5   Measure Range:0-0.2Mpa
NO-6   Meausre Range:0-3.5Mpa (The concrete is specially coated with the forging die with a diameter of 50mm)

ISO 4624 ASTM D 4541 Pull Type Adhesion Tester Meter Tests Instrument GA-6024