DRPL-11 geotechnical (stone) thermal conductivity instrument Heat flow meter detector ASTM C518

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: DRPL-11
• Transport Package: Plywood Case
• Specification: 150× 150 (mm).
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

DRPL-11 geotechnical (stone) thermal conductivity instrument Heat flow meter detector ASTM C518onductivity tester ASTM C518
1.Product introduction
The thermal conductivity and thermal resistance of soil such as clay, rock, sand, aerogel plate and vacuum glass were detected by heat flow meter, and the automatic detection was realized by computer, and the experimental report was generated. The instrument adopts a stable hot surface temperature added to the sample side, the heat is transferred to the cold surface (room temperature) through the sample, and the heat transfer is measured to calculate the thermal conductivity and thermal resistance. Specially equipped with rock and soil sample tube and specific heat capacity test device, it can do heat conduction analysis and specific heat capacity measurement of clay, rock and soil, sand and other soils. Instrument reference standard: GB/T10295-2008 (Determination of steady-state thermal resistance and related properties of thermal insulation material heat flow meter method) and ASTM C518-04 test method for determination of steady-state heat flux and heat transfer characteristics by heat flow meter method.

Product Parameters

DRPL-11 geotechnical (stone) thermal conductivity instrument Heat flow meter detector ASTM C518
2. Product Parameter

thermal conductivity range	0.001 ~ 100W/m.k, accuracy better than 3%. (Equipped with a special round sample cylinder for rock and soil (stone) measurement, Ф60mm,Ф80mm,Ф90mm optional)
hot surface temperature	room temperature ~ 99.99ºC, using high number of degrees display table temperature measurement, 0.2 accuracy, resolution of 0.01ºC.
cold surface temperature	room temperature, using high number of degrees display table temperature measurement, 0.2 accuracy, resolution of 0.01ºC
hot surface temperature control	room temperature ~ 99.99ºC, using high degree programming digital display meter temperature measurement, 0.2 accuracy, resolution of 0.01ºC, plate heater, bidirectional thyristor control.
hot and cold plate heat transfer area	150×150 (mm).
hot and cold plate adjustable spacing	0 ~ 160 (mm).

 cold surface using forced water cooling.
 Automatic testing by computer.
 using WPY heat flow meter, heat flow parameter 23.26w/m2.m.V.

Detailed Photos