Automatic powder compacting density meter

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: FT-100F
• power supply: 220v
• Transport Package: Plywood Case
• Trademark: Plywood case
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Automatic powder compacting density meter
1.Principle
During the compression process of external force, as the powder moves and deforms, larger gaps are filled, the contact area between particles increases, the atoms are attracted, and the mechanical wedging between particles is strengthened, thus forming a compact with density and strength.
Automatic powder compacting density meter
2.Application description
1. During the production process of lithium-ion power batteries, compaction density has a great influence on battery performance.
2. Compaction density is closely related to sheet specific capacity, efficiency, internal resistance, and battery cycle performance.
2. Compaction density is very important for battery design. The higher the compaction density, the higher the battery capacity can be, so compaction density is also regarded as one of the reference indicators of material energy density.
3. Compaction density is not only related to the size and density of particles, but also to the grading of particles. Those with large compaction density have good normal distribution of particles. Under process conditions, the higher the compaction density, the higher the battery capacity.
Automatic powder compacting density meter
3.Scope of application
1. Reference standard: GBT 24533-2009 Graphite negative electrode materials for lithium-ion batteries, Appendix L: Test method for compacted density of powders,
2. GB/T 24533-2019 Graphite negative electrode materials for lithium-ion batteries
3..It can also be used to determine the compacted density of powders and particles with similar characteristics.
Automatic powder compacting density meter
4.Function description
1. Hydraulic or servo motor constant pressure measurement system.
2. 7-inch touch screen + PC software (process analysis).
3. Load cell control system can collect stress change data.
4. Pressure and time data can be set.
5. Displacement sensor direct reading - digital display of sample compression height change.
6. Two measurement modes: general material mode, elastic material measurement mode.
7. Vacuumable mold
8. PC software can obtain the relationship between stress, powder density, time, and powder yield strength; process data analysis and curve map.
9. Establish data model.
10. Chinese and English versions.

Product Parameters

Test items	FT-100F	FT-100H
Main pressure (optional)	5 tons; 10 tons; 20 tons	2 tons; 3 tons; 5 tons
Displacement measurement	Displacement sensor system, resolution 0.001mm
Displacement stroke	0-20mm
Control system	Hydraulic control system Servo power system	Hydraulic control system Servo power system
Display mode	7-inch touch screen + PC software
Mold (optional)	A. Standard inner diameter: 13mm; B. Optional inner diameter 12.8mm; height: 25mm; precision 0.01mm
Demolding method	automatic
Protective device	Automatic diagnosis, overload protection and emergency stop control
Temperature and humidity range	Normal temperature -50 degrees; humidity: 20%-98%
Time setting	0-99.9S   ;0.1S
Equipment management function	Permission setting and data management storage
Density value	99.99999g/cm3
Deformation	Can measure elastic material deformation 0.01%----50%
Balance (optional)	0.00001g, range: 120g
Displacement speed	Less than 15mm/min; resolution 0.1mm/min
Operating environment requirements	Instrument use environment requirements: working temperature: -10ºC-40ºC, humidity: ≤65%RH
Power supply	380v
Tolerance of the whole machine	Different samples have different characteristics and densities, which vary by ≤3%	Different samples have different characteristics and densities. The difference is ≤1%
Optional items	a. Extended warranty service; b. Metering service; c. Computers and printers

 

Detailed Photos