ASTM C 368 Ceramic Impact Tester Analyzer Shock Testing Machine Instrument Impact Resistance Tests Device for Daily

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: GA-T401
• Type: Ceramic Brick Impact Tester
• Accuracy Grade: 6 Inches to 10 Inches and a Half Flat Plate
• Load Way: Electronic Load
• Display: Digital
• Weight: 95kg
• Power Source: Start 0.136j Impact, and Then 0.027j Capacity
• Transport Package: Plywood Case
• Specification: 750× 400× 1000mm
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

ASTM C 368 Ceramic Impact Tester Analyzer Shock Testing Machine Instrument Impact Resistance Tests Device for Daily
1.Overview
This domestic ceramic impact tester is used for impact test of flat tableware and concave ware center and impact test of concave ware edge. Flat tableware edge crushing test, the sample can be glazed or not glazed. The impact test on the test center is used to measure:

1.The energy of a blow that produces the initial crack.

2. Produce the energy needed for complete crushing.
Reference standards: GB/T4742 impact toughness test method for domestic ceramics, QB/T 1993-2012 "Impact Resistance Test method for Ceramics" and ASTM C 368 impact resistance test method for ceramics.

ASTM C 368 Ceramic Impact Tester Analyzer Shock Testing Machine Instrument Impact Resistance Tests Device for Daily
2.Standard: ASTM C368

ASTM C 368 Ceramic Impact Tester Analyzer Shock Testing Machine Instrument Impact Resistance Tests Device for Daily
3.Equipment structure
The instrument consists of a steel base fitted with horizontal adjusting knobs and a vertical steel frame suspended with electromagnets, a conduit and a support for test components.
The test unit is firmly fixed in a central position so that the falling steel ball hits the surface of the horizontal tile. The distance between the bottom of the catheter and the lower end should be less than 9.
Electronic timer, using a sensor to determine the time of the first and second impact of the steel ball falling on the sample, from the timer to directly read its time interval T.
Configuration: including one GA-T400 test instrument, one test stand and two drop balls.

Product Parameters

ASTM C 368 Ceramic Impact Tester Analyzer Shock Testing Machine Instrument Impact Resistance Tests Device for Daily

3.Main technical parameters of domestic ceramic impact tester
1. Maximum impact energy: 2.1 joules;
2, the minimum indexing value of the dial: 0.014 joules;
3, pendulum maximum lifting Angle :120 degrees;
4, pendulum axis center to impact point distance :300 mm;
5, the maximum lifting distance of the table :120 mm;
6, the maximum longitudinal moving distance of the table :210 mm;
7, sample specifications :6 inches to 10 inches and a half flat plate, height not more than 10 cm, caliber not less than 8 cm bowl type caliber not less than 8 cm cup type;
8. Net weight of testing machine :95;
9.prototype dimensions :750×400×1000mm;
10.the impact test of the edge of the concave vessel: start 0.027J impact, with 0.014J energy increase,
11.flat tableware edge crushing test: start 0.136J impact, and then 0.027J capacity increase start 0.027J impact, 0.014J energy increase,
12. Impact test sequencing of flat tableware (cutlery, fork, spoon, etc.) : Start with 0.027J impact, increase with 0.014J energy until the sample breaks for the first time, then increase with 0.028 capacity until the test fails.
Configuration: including one GA-T401 impact meter, one set of sample fixing fixture.

Detailed Photos

 

Company Profile