ISO 13007 ASTM D1335 ISO 4587 Foam Compress Testing Machine Foam Tensile Strength Tester Sponge Compression Testing Device(0-20KN) GA-3003-A
Design standards:
ASTM D903, GB/T2790/2791/2792, CNS11888, JIS K6854, PSTC7,GB/T 453,ASTM E4,ASTM D1876,ASTM D638,ASTM D412,ASTM F2256,EN1719,EN 1939,ISO 11339,ISO 36,EN 1465,ISO 13007,ISO 4587,ASTM C663,ASTM D1335,ASTM F88,ASTM D882 or ASTM D5034,ASTM F2458,EN 1465,ISO 2411,ISO 4587,ISO/TS 11405,ASTM D3330,FINAT.......
Use
Suitable for aerospace, petrochemical industry, machinery manufacturing, metal materials and products, wire and cable, rubber, paper and plastic color printing packaging, adhesive tapes, bags handbags, textile fibers, textile bags, food, pharmaceutical and other industries.To test the physical properties of the various materials and finished products, semi-finished products, choose a variety of fixture to do tensile, compressive, hold, hold pressure, bending, tear, pee(90degree,180 degree peel), adhesion and shear test.It is an ideal testing and research equipment for factories, technical supervision departments, commodity inspection institutions, scientific research institutes and colleges and universities.
ISO 13007 ASTM D1335 ISO 4587 Foam Compress Testing Machine Foam Tensile Strength Tester Sponge Compression Testing Device(0-20KN) GA-3003-A
Features:
1. The machine has completely changed the new material testing machine for the whole calculator operation, which was developed from the shortcomings of the conventional material testing machine, which is bulky, complex and complicated.
2. The structure adopts the steel plate and aluminum extruded plate with advanced baking paint, with high precision, low resistance, seamless precision screw and guiding column, which improves the load efficiency and structural rigidity.
3. The control system adopts the motor of the whole digital communication server to ensure that the transmission system is high in efficiency, stable in transmission, low in noise and accurate in speed.
4. Microcomputer system by commercial calculator as the main control machine, cooperate with the company's QCTech testing software, can complete all of the test parameters setting, working state control, data acquisition and processing analysis, result display and printing output;
5. Dedicated measurement and control system is specially designed for microcomputer electronic universal testing machine.It can stretch, compress, bend, shear, tear and peel off test.The data acquisition, preservation, processing and printing test results of PC and interface board are adopted.It can calculate the maximum force, yield force, average stripping force, maximum deformation, yield point, elastic modulus and other parameters;It can perform curvilinear processing, graphical graphical interface, flexible data processing, ms-access database support, making the system more powerful.
Parameters and specifications
A. Software Technical Parameters:
Software operating system language: English.
Force units: N, KN, Kgf, Lbf, length units: mm, cm, in can be freely converted
Control mode:
The computer software sets the speed, load rupture, running time and other control methods
Special manual operation box: convenient for calibration and positioning when loading and holding test pieces
Automatically determine material fracture, crushing, etc. And automatically stop, can set automatic return
Curve type:
Load-displacement, load-time, displacement-time.
Stress-strain, strain-time, stress-time.
The vertical and horizontal coordinates of the curve can be set arbitrarily.
Available test data:
Maximum strength, minimum strength, fracture value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum value, minimum value, average value, etc.(customers need to select before ordering) with overload, overcurrent, overvoltage, undervoltage, overspeed, stroke and other multiple protection.
The data results are derived from the current standard crystal report format.
B. Hardware Technical Parameters:
| Capacity |
KN |
2 |
| Accuracy |
High precision |
0.5 level , ±0.5%, |
| Load sensing |
High precision tension and pressure transducer,(multiple sensors can be installed at the same time - optional) |
| High resolution |
1/500000 |
| Magnification |
24digit AD No period of zoom |
| Unit choose |
N, KN, Kgf, Lbf |
| Test speed range |
Servo : 0.1~500 mm/min can set |
| Speed control accuracy |
±0.2% (0.5level ) |
| Up compress plate |
Diameter 200mm,Bottom rounded R1mm |
| Down plate |
400×400mm, air hole diameter 6mm, spacing 20mm |
| Overload setting protection function |
When the set test force exceeds 10%, the system will automatically stop for protection |
| Protection function of stroke setting |
Protection for upper and lower limit position of stroke |
| Motor |
Servo motor |
AC Servo motor & servo drive controller |
| Power consumption |
0.5 kVA |
| Power |
1ø, 220 VAC, 50/60 Hz |
| Computer |
Hardware |
The supplied hardware specifications can be purchased from the original ACER brand or supplied by the customer |
| Special software |
Refer to the software version of the computer measurement system |
| Volume |
65x55x200cm |
| Weight |
200 kg |
ISO 13007 ASTM D1335 ISO 4587 Foam Compress Testing Machine Foam Tensile Strength Tester Sponge Compression Testing Device(0-20KN) GA-3003-A
Software Introduction:
1.Connect tensile tester with computer well,open software,Press Setting-Online-COM1......
2.Calibration,Press Setting-Calibration,input password,and enter calibration menu,Press ReadFromChip,Press OK,the software will read from tensile tester chip
3.Input the Specimen shape,size......
4.Choose Test Methods,you can set the test methods.
5.Set Unit
6.In software,you can see different testing views,like Force-Elong(Displacement),Force-time, Multi-graph...
7.Test Result,Press AddReord,choose the test result you save before,and Press OutPutReport,it will output the test result with Word type.If you choose one record,it will output 1 test report.
8.If you need to add test items of testing,or need to add formula,please choose Edit.Choose the test items you need,Press Insert-OK,save it.Or Press Edit to add formulas.
9.Test Reort Form(For Example)
Software Setting For Foam
Audited Supplier 
){kind=link}
){kind=link}