| Customization: | Available |
|---|---|
| After-sales Service: | online |
| Warranty: | 1 year |
|
Still deciding? Get samples of US$ 1500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM D 991Conductive Rubber and Electrostatic Rubber Products Resistivity Tester
1. Reference Standards
ASTM D 991-1989 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D 991Conductive Rubber and Electrostatic Rubber Products Resistivity Tester
2. Scope of application
Determination of volume resistivity of rubber used for conductive and electrostatic products
ASTM D 991Conductive Rubber and Electrostatic Rubber Products Resistivity Tester
3. Function introduction
LCD display, equipped with ASTM D 991 test device, digital key operation, optional PC software report export and data management; electrode assembly, composed of a rigid base made of electrical insulating material with a resistivity of 10TΩ•m, a pair of current electrodes and a pair of potential electrodes are fixed in parallel with four electrodes and their top surfaces are on the same horizontal plane. Another pair of current electrodes identical to the previous pair should be fixed on two pieces of insulating material and can be superimposed on the top of the previous sample. Brass electrode, insulation resistance between electrodes is more than 1TΩ; pressure is applied to the sample to calibrate the pressure.
| Model | FT-303D |
| Resistance measurement range | 104Ω~1×1013Ω |
| Resistivity measurement range | 104~ 2.0×1013 Ω-cm |
| Test voltage | 0-1000V |
| Basic accuracy | 2% |
| LCD display | Resistivity, resistance, temperature, current, voltage, test sample data can be input |
| Usage environment | Temperature: 0ºC~40ºC, relative humidity <80% |
| Power supply | AC 220V,50HZ, 5W |
| Measuring mode | Configure 232 and USB communication interfaces, LCD display test or PC software test |
| Fixture (standard size) | Distance between potential electrodes (6.35 cm) Sample width (7.62 cm) Clamp has fixed mass based on 4.0 inch (7.62 cm) sample width Mass between current electrodes and sample = 6.67 lbs (3 kg) Mass between potential electrode and sample = 1.34 lbs (0.6 kg) |
| PC software (optional) | PC Test Software |
| Dimensions | L 340mm* W 320mm* H 120mm |
){kind=link}