80L Constant Temperature and Humidity Test Chamber Tester Climatic Environmental Chamber Testing Machine Equipment Ga-2001-E

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: GA-2001-E
• Transport Package: Plywood Case
• Specification: 100*150*120cm
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

80L Constant Temperature and Humidity Test Chamber Tester Climatic Environmental Chamber Testing Machine Equipment GA-2001-E
Design Standard:

GB11158	High Temperature Test Chamber Technical Condition
GB10589-89	Low Temperature Test Chamber Technical Condition
GB10592-89	High-low Temperature Test Chamber Technical Condition
GB/T10586-89	Damp Heat Test Chamber Technical Condition
GB/T2423.1-2001	Low Temperature Test Chamber Test Methods
GB/T2423.2-2001	High Temperature Test Chamber Test Methods
GB/T2423.3-93	Damp Heat Test Chamber Test Methods
GB/T2423.4-93	Alternating Damp-Heat Test Methods
GB/T2423.22-2001	Temperature Changing Test Methods
IEC60068-2-1.1990	Low Temperature Test Chamber Test Methods
IEC60068-2-2.1974	High Temperature Test Chamber Test Methods
GJB150.3	High Temperature Test Methods
GJB150.4	Low Temperature Test Methods
'GJB150.9	Damp Heat Test Methods

80L Constant Temperature and Humidity Test Chamber Tester Climatic Environmental Chamber Testing Machine Equipment GA-2001-E
Usage introduction:
This test chamber provides high temperature, low temperature, high humidity, low humidity simulation environment, to detect rubber, plastic, electronic products before and after the test of the material and strength of the decay degree. The machine can also simulate the container environment, to detect rubber, plastic under high temperature and humidity, fading, shrinkage situation. Test the heat resistance, cold resistance, dry resistance and moisture resistance of various materials. Suitable for electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureau, paper products, food, vehicles, auto parts, metal, chemical, building materials and other industries factory unit quality control testing.

80L Constant Temperature and Humidity Test Chamber Tester Climatic Environmental Chamber Testing Machine Equipment GA-2001-E
Parameters

Item	Description
Basic product introduction
Name	constant temperature and humidity test chamber
Model	GA-2001-E-80Z
Quantity	1 Piece
Brand	GONOAVA
Satisfying criteria	1.GB11158 Technical conditions of high-temperature test chamber 2. GB10589-89 Technical conditions of low temperature test chamber 3. GB10592-89 Technical conditions of high and low temperature test chamber 4.GB/T10586-89 Humidity and heat test chamber technical conditions 5.GB/T2423.1-2008 Low temperature test chamber test method 6. GB/T2423.2-2008 High temperature test chamber test method 7. GB/T2423.3-2006 Humid heat test chamber test method 8.GB/T2423.4-2008 Alternating humid heat test method 9. GB/T2423.22-2002 Test method for temperature change 10.IEC60068-2-1.1990 Low temperature test chamber test method  11. IEC60068-2-2.1974 High temperature test chamber test method 12. GJB150.3 high-temperature test 13. GJB150.4 low temperature test 14. GJB150.9 damp heat test

Descriptive use	This test chamber provides high temperature, low temperature, high humidity, low humidity simulation environment, to detect rubber, plastic, electronic products before and after the test of the material and strength of the decay degree. The machine can also simulate the container environment, to detect rubber, plastic under high temperature and humidity, fading, shrinkage situation. Test the heat resistance, cold resistance, dry resistance and moisture resistance of various materials. Suitable for electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureau, paper products, food, vehicles, auto parts, metal, chemical, building materials and other industries factory unit quality control testing.
Features	Perfect modeling design high texture appearance equipment noise small operation simple safe and reliable
Prohibited items of experimental equipment	1. Test or store samples of flammable, explosive and volatile substances 2. Test or store corrosive substance samples 3. Testing or storage of biological samples 4. Testing or storage of samples of strong electromagnetic emission sources
Performance index
Interior dimension	(Width * height * depth)  400mm*500mm*400mm
Carton size	(Width * height * depth))900×1450×1100 mm
Container Internal  Volume	80L
Temperature range	-40ºC ~ +150ºC
Humidity range	20~98% R•H adjustable

Temperature and humidity control range
Control stability	temperature≤±0.5ºC;humidity≤±2%
Equilibrium of distribution	temperature≤±1.5ºC;humidity≤±3.0%
Heating up time	Average 2~5ºC/ min, nonlinear no-load temperature rise
Cooling time	Average 0.7~1ºC/ min, nonlinear no-load cooling
Temperature limit	maximum temperature +150ºC;minimum temperature -40ºC
Box structure
The box structure is introduced	The whole is divided into three combinations of laboratory, electric control cabinet and machine bin. The upper left side is the laboratory, which is composed of the inner chamber of the insulation layer. The single door type is different to the left. The electric control cabinet is located on the right side. The panel is mainly composed of temperature controller, switch press button and fault protection indicator light. The machine compartment is placed below the laboratory and is composed of accessories such as filter, solenoid valve, line part and compressor.
Shell material	Steel plate paint
Interior material	SUS#304 corrosion resistant plate
Insulation material	100mm Hard polyurethane foam or glass fiber, fire resistant, meet environmental requirements
Door	Hinged single door, in order to prevent condensation or frost on the edge of the door frame and door during low temperature test, the edge of the door frame and door is provided with electric defrost device;

Seal	The door and frame of the test box are sealed with double silicone rubber strips, which are resistant to high and low temperature, anti-aging, and have good sealing performance
Inspection window	The single door is equipped with 3 layers of vacuum large glass observation window, and there is no frost and condensation on the surface during any test.
Ilumination	LED AC220V Energy-saving lamp 1, installed on the window, explosion-proof and moisture-proof
Instrument connection	Body with Φ50mm hole 1, soft plug and hole cover each 1. It can be used for external test power cable or signal cable. (Φ100mm cable test hole can be customized)
Trundle	The bottom of the machine adopts 4 sets of high-quality fixed universal movable wheels (easy to move) and flat foot cups (adjust the balance of the body).
Commodity shelf	The box is equipped with 2 stainless steel shelves with adjustable height.
Temperature and humidity system
Heater	Adopt Taiwan imported stainless steel fin type heat dispersing pipe type heating pipe
Humidifier	Split humidifier cylinder design

Humidification system	Water tank to pumping motor, pumping motor has double float control, the lower float ball falls to start pumping, the upper float ball floating pumping disconnected, double float control pumping motor benefits, the motor will not frequently pumping. Split humidifier bucket Large clear glass window                              It can clearly observe the water level and the cleanliness of the humidifier barrel
Water quality filter	Filter the dirt inside the water, but also easy to disassemble and clean
Water suction pump	Delta quiet type self-priming pump, low noise, stable performance, with its own filter (easy to clean water pump)
water tank	Built-in removable water Tank 1 PCS (easy to clean) Water shortage warning device
Air circulation system
Motor	Yizheng synchronous acoustic mute motor
Air transport mode	The high temperature resistant circulating fan is adopted, and the motor is installed outside the inner box. The stainless steel extended shaft extends into the box. The multi-wing aluminum alloy fan wheel is installed at the end of the long shaft. Special heat insulation measures and cooling system improve the safety of the motor, the motor has high temperature self-protection function. Special adjustable 100 page air supply circulation system, to ensure the temperature uniformity in the box.

Refrigerating system

Refrigerating system

Refrigeration methods are divided into vapor compression refrigeration, absorption refrigeration, vapor injection refrigeration, gas expansion refrigeration, thermoelectric refrigeration. Among the above refrigeration methods, vapor compression refrigeration is the most economical and most widely used refrigeration method, and is also the most commonly used refrigeration method in environmental test equipment. Its principle is to use the evaporation potential of environmental freon and other liquids to absorb heat from the cooled object and achieve refrigeration. (single stage refrigeration cycle diagram) is a schematic diagram of the steam compression refrigeration cycle process. The liquid that is throttled into the evaporator through the expansion valve absorbs the latent heat of evaporation from the surrounding objects and evaporates. After evaporation, it becomes low-temperature and low-pressure gas and is sucked into the refrigeration compressor. After being compressed by the compressor, it becomes high-temperature and high-pressure gas and enters the water-cooled or air-cooled condenser, where it is cooled into high-pressure liquid and then enters the evaporator through the expansion valve. In this cycle, heat is absorbed from the cold to cool, and heat is released from the hot. A change from one state to another in the refrigeration cycle shown is called a process. There are four processes in the refrigeration cycle. The following is a brief description of the four processes in the refrigeration cycle. (1) Evaporation process: through the expansion and throttling of low pressure wet steam, in the evaporator from the surrounding medium to absorb heat refrigeration, and gradually increase its dryness. The gas that comes out of the evaporator is either dry saturated or slightly superheated. During evaporation, the refrigerant temperature and pressure remain constant. (2). Compression process: after the completion of refrigeration, the vapor from the evaporator enters the refrigerator. After compression, the temperature and pressure rise sharply. So the gas that comes out of the refrigerator becomes a superheated hot vapor. During the compression process, the entropy of the refrigerant remains constant. (3). Condensation process: the high temperature and high pressure superheated vapor discharged from the refrigerator is exchanged with cooling water or air after entering the condenser, so that the superheated vapor gradually becomes saturated vapor, and then becomes saturated liquid. Saturated liquid temperature when cooled with cooling water The degree will continue to drop and there will be supercooling. The pressure remains constant during condensation. (4) throttling process: the liquid from the condenser is throttled through the expansion valve or capillary throttling device to become low temperature and low pressure wet steam, and the enthalpy value of the refrigerant remains unchanged during the throttling process. The above four cyclic processes are continuously circulated in turn to achieve the purpose of refrigeration. In order to complete the thermodynamic process of the refrigeration cycle, the compressor, heat exchanger, pipeline, pipeline accessories, etc., need to be composed of a system, the system is called refrigeration system. Single-stage compression refrigeration means that the refrigerant vapor is compressed only once, and its lowest evaporation temperature can be controlled between -30ºC and -40ºC. When a lower test temperature is needed, the overlapping refrigeration system is usually used, that is, two single-stage compression refrigeration systems are overlapping. One system is the high temperature part, using medium temperature refrigerant; the other system is the low temperature part, using low temperature refrigerant. The high-temperature evaporator and the low-temperature condenser are overlapped to form the condensing evaporator.

Refrigeration compressor	Originally imported from France "Taikang" fully enclosed compressor or "Emerson" fully enclosed compressor
Condenser	The high temperature and high pressure vapor discharged from the compressor is cooled into a liquid; The heat released is carried away by water or air. Can be divided into water - cooled, air - cooled
Evaporator	Vaporize a liquid into a gas; Absorb heat or dehumidify
Device for drying and filtering	Absorb the residual water and acid in the refrigerant of the refrigeration system, filter out the solid impurity particles in the system, copper cutting, etc., protect the normal operation of the expansion valve and capillary, and avoid the occurrence of ice blockage and water blockage
Oil separator	The Emerson oil separator separates the refrigerant from the liquid that is ejected from the compressor to protect the compressor from the loss caused by the accumulation of refrigerant liquid (usually used in overlapping systems or large single systems).
Refrigeration system technology	The low-temperature connecting pipes are made of high-quality oxygen-free copper pipes, and the famous "Rosenberg" electric pipe bender is used for pipeline fabrication, nitrogen filling welding, and 48-hour high pressure and leakage prevention process to ensure the welding quality Pipeline welding: The high quality copper pipe nitrogen protection welding mode, so that the copper pipe inside smooth no oxidation, avoid the traditional welding mode caused by oxide impurities in the inner wall of the copper pipe into the refrigeration system to the compressor damage. Vibration reduction measures: the compressor is installed at the bottom of the vibration reduction spring and anti-vibration soft rubber pad combination vibration reduction; Anti-vibration hoses and C-shaped elbows are added to the pipes of the refrigeration system to avoid cracking of copper pipes caused by vibration and temperature changes, resulting in refrigerant leakage and affecting the overall performance of the system. Noise control: Low speed and high air volume condensing fan is used on the condenser to achieve low noise effect
Control system
Controller picture
Control mode	Balanced temperature and humidity control system (BTHC), based on P.I.D. control SSR, the heating and humidification of the system is equal to the heat and humidity loss, so it can be used for a long time.

Controller characteristics	Independent research and development design Programmable controller LCD, color screen display Touch screen direct button type Temperature and humidity can be programmed simultaneously Chinese and English display 7 inch real color screen Large LCD controller with high contrast and adjustable backlight.
Controller specification	Accuracy: Temperature ±0.1ºC, humidity ±1%R.H Resolution: Temperature ±0.1, humidity ±0.1%R.H. With upper and lower limit standby and alarm function Temperature and humidity incoming force signal select PT 100Ω×2 (dry ball and wet ball) 9 groups of P.I.D control parameter setting,P.I.D automatic calculation Automatic wet and dry bulb correction
Picture display function	Screen conversation, no key input, screen directly touch options The temperature and humidity setting (SV) and the actual (PV) value are directly displayed Can display the current program number, segment, remaining time and the number of cycles Run time accumulation function Temperature and humidity program set values to graphic curve display, with real-time display program curve executive function With a separate program to edit the screen, each page can input at least 5 times of temperature, humidity and time Chinese and English can be switched arbitrarily. The fault prompt screen is displayed. The screen can be backlit The screen display protection function can be used for timing, TIMER or manual shutdown Settings.
Program capacity and control functions	Groups of programs available: up to 120 PATTEN Available memory capacity: 1200 SEGMENTS Repeatable commands: Each command can be executed 999 times The production of the program adopts conversational style, with editing, clearing, insertion and other functions SEGMENTS The interval is set from 0 to 99Hour59Min With the power off program memory, after the resumption of the automatic start and continuation of the program function Program execution can be real-time display graphic curve With an appointment to start and shutdown function With date, time adjustment function Button and screen LOCK function
Protector
Protector	1. Zero-crossing thyratron power controller
	2. Heating air burn protection switch
	3. Compressor overpressure protection switch
	4. Compressor overload and overcurrent protection switch
	5.Phase loss protection switch
	6.No fuse overload protector
	7.Water tank protection switch
	8.Fast heating and humidification insurance
Installation instructions
Service voltage	220V±10%  50HZ
Power	4KW
Permissible use environment	0 ~30ºC
Performance assurance environment	5 ~ 25ºC
Cap screw	Body left Ø50mm test hole with threaded cover 1 set
Non-woven fabric	Standard test nonwoven fabric 3 pieces
Specification	Provide a copy when ordering
Specification	One copy of equipment manual
After-sales service commitment
After-sales service commitment	1. After-sales service is provided by professional technicians from the technical service Department of the company. 2. The customer shall provide the external conditions required for instrument installation, and be responsible for placing the instrument in place. Other components and accessories are in the installable state, and the product shall be installed and adjusted by engineers and technicians on site for free, and 1-2 system operators shall be trained for free. 3. Upon receiving customer service requirements, we will provide customers with formal written maintenance plan within eight hours, and on-site service within 24 hours in Dongguan. 4. The product warranty period is 12 months, during which the supplier will repair and replace the parts damaged due to quality reasons free of charge; Only the cost of production is charged if the fault occurs due to non-product quality problems. If the parts are damaged outside the warranty period, the spare parts provided will only be charged for the cost And wearing parts.

Part distribution parts clear list
 

Parets name	Brand	Place of origin
controller	Research Joint Venture	China
compressor	Emerson	America
evaporator	keweili	China
condenser	keweili	China
refrigerating fluid	Honeywell	America
refrigerant oil	Ice Bear	America
condenser fan	Marl	China
oil separator	Emerson	America
Standard nonwoven fabric	Chung Wah Chow	China
dry filter		Denmark
wind wheel	Yizheng	China
Water level float	twin float	China
water pump	delta	China
time relay	CKC	China
intermediate relay	Electric	France
transformer	Zhejiang Chint	China
Phase break and phase sequence protection relay	OMRON	Japan
solid state relay	MEGA	China
thermal relay	Electric	France
temperature sensor	Badminton Hall	China
humidity sensor	Badminton Hall	China
no-fuse switch	intellectual circle	Taiwan, China
Humidifier tube	customization	China
circulating fan	Yizheng	China
solenoid valve	HUNG-SEN CHEN	China
button switch	South Street Seaport   Museum	China
heating tube	customization	China