Computer Control Electronic High Low Temperature Tensile Testing Machine Temperature Test Chamber

• After-sales Service: Online
• Warranty: 1 Year
• Type: Tensile Testing Machine
• Accuracy Grade: 0.4% ~ 100%
• Weight: (About) 460 Kg
• Power Source: 220V±10% 0.4kw Hkcmc Servo Motor
• Model NO.: GA-110
• Transport Package: Plywood Case
• Specification: 800× 500× 2200mm
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Computer Control Electronic High low temperature tensile testing machine Temperature Test Chamber
1.Main functions
This machine is suitable for stretching, compression, tearing and stripping (90 degrees and 180 degrees) of rubber, tire, hose, tape, adhesive tape, soles, plastics, film, acrylic, FRP, ABS, EVA, PU, alumina-plastic pipe, composite material, waterproof material, fiber, textile, wire and cable, paper, gold foil, belt, silk thread, spring, wood, pharmaceutical packaging material, tape and so on The test and analysis of mechanical properties.
This machine is a new type of material testing machine combining electronic technology and mechanical transmission, which has high accuracy and sensitivity for the measurement and control of load, deformation and displacement. The series of models adopt single space structure, test space in the lower space, mainly suitable for the test load less than 5kN of metal and non-metal material test, with stress, strain, displacement control mode. Parameters such as maximum force, tensile strength, bending strength, compressive strength, elastic modulus, elongation at break and yield strength can be obtained.
Test information available
Maximum strength, minimum strength, fracture value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum, average value of peel interval, etc. It has multiple protection such as overload, overcurrent, overvoltage, undervoltage, overspeed and stroke.
The data results are derived from the crystal report format currently accepted by the national standard.
 

Product Parameters

Computer Control Electronic High low temperature tensile testing machine Temperature Test Chamber
2.Introduction of Control Software

Software operating system language	Chinese/English
Force value unit	N, KN, Kgf, Lbf
Unit of length	mm, cm, in can be freely converted
Automatic return to zero	When the computer received the test start command, the measurement system automatically reset to zero
Display mode	The data and curves are displayed dynamically with the test process.
Results Reproduction	The test results can be accessed arbitrarily, and the data curve can be re-analyzed.
Results Comparison	Multiple test characteristic curves can be superimposed, reproduced, enlarged, and presented in different colors to analyze and compare a group of samples
Emergency shutdown	Equipped with emergency stop switch, used to cut off the power supply of the whole machine in emergency;
Control Mode	Computer software set speed, set load fracture (rupture), running time and other control methods. Automatic determination of material fracture, crushing and automatic shutdown, can be set to return automatically
Curve Type	Load-displacement, load-time, displacement-time. Stress-strain, strain-time, stress-time. The vertical and horizontal coordinates of the curve can be set arbitrarily.

3.Technical parameters

Capacity selection	5KN, American brand high precision load element
Accuracy level	Grade 0.5
Effective force measuring range	0.4% ~ 100%
Accuracy of force measurement	Within ± 0.5% of the indicated value
Test machine resolution	The maximum load is 1/±250000 yards, the inner and outer are not graded, and the whole resolution is unchanged
Load cell sensor	Basic configuration: tension and pressure sensor (maximum load)
Effective test width	400mm
Effective stretching space	More than 800mm (without high and low temperature box without fixture, box travel more than 300mm)
Test speed range	0 ~ 500mm/min
Displacement measurement accuracy	Within ± 0.5% of the indicated value
Test bench safety device	Electronic limit protection
Test bench return function	Manual or automatic selection, automatic or manual return to the initial position of the test after the end of the test
Overload protection	When the maximum load exceeds 10%, the machine is automatically protected
Fixture configuration	A set of stripping fixtures
Main engine size	800×500×2200mm
motor	220V±10% 0.4KW HKCMC servo motor
Transmission mechanism	High precision ball screw
Main engine weight	(about) 460 Kg

 

Detailed Photos