Industrial Oven Laboratory Oven Device Equipment for Pre-Heating Drying Test Ga-2004-a

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: GA-2004-A
• Power: 3.5kw
• Transport Package: Plywood Case
• Specification: 720*580*990mm
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Industrial Oven Laboratory Oven Device Equipment for Pre-heating Drying Test GA-2004-A
Structure And Size
1. Inner size: 450(width) x 400(depth) x 400(height)mm
2. External size: 720(wide) x 580(deep) x 990(high)mm+110mm trundle, subject to the real object;
3. Operation panel: the control panel is above the machine (as shown);
4. Opening method: single door opens from right to left;
5. Viewable window: visible window on the door: specification: W200*H250mm;
5. The inner material is: 430# mirror plate, 1.0mm thick;
6. The outer material is: cold-rolled steel plate, 1.0mm thick.
7. Interlayer: there are two inner layers, and two meshes;
8. Thermal insulation material: glass fiber rock wool, with good thermal insulation effect;
9. Sealing material: high-temperature foamed silica gel bar;
10. Install brake movable casters on the machine;
11. The overall structure is floor-type.

Uses
This machine can provide a stable test space for pre-heating, drying, changes about physics and chemistry testing.It supplys precision temperature controllter with high stability of platinum resistance to temperature that makes temperature well-distribution.

Industrial Oven Laboratory Oven Device Equipment for Pre-heating Drying Test GA-2004-A
Temperature control system
1. The temperature control instrument is PID digital display instrument (taichung instrument in Taiwan), single-point temperature control, which can be automatically calculated, PV/SV simultaneously displayed, button setting;
2. Timer setting: from 1 second to 9999 hours (optional setting hours, minutes and seconds) when the temperature reaches time, when the heating current is stopped, and an alarm is prompted at the same time;
3. Temperature line (K) type;
4. Signal output is 3-32v;
5. The heating controller is: solid relay SSR without contact;
6. Heating material: heat resistant tube;
7, temperature range: 50 ~ 300 ºC adjustable, commonly used temperature within 260ºC;
8, rate of temperature: 100 ºC about 15 minutes
9, the control precision, ± 0.5 ºC;
10, display precision: 0.1 ºC
11, temperature deviation: 50-200 ºC ±2.0 ºC, 201-300 ºC±3.0 ºC. (no-load test)


Power Supply Device
1. Voltage AC 220V single-phase 50HZ
2. Current 16A
3. Power: 3.5kw

Industrial Oven Laboratory Oven Device Equipment for Pre-heating Drying Test GA-2004-A
Air supply system
1. Air supply mode: internal horizontal hot air circulation;
2. The motor is temperature-resistant special type, with motor power of 370W/220V;
3. The fan is 7.5-inch multi-wing turbine type;
4. The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.


Safety protection system
1. Over-temperature protection system: when the temperature is out of control and the temperature is set beyond the over-temperature protection, the heating power supply will be automatically stopped to protect the safety of products and machines;
2. Circuit protection system: ground protection, rapid insurance, etc.