ASTM D4541 ISO 4624 Automatic Pull-off Adhesion Tester Tests Machine Intelligent Adhesion Testing Instrument BGD500S
Introduction
There are currently three main methods for testing the adhesion of a coating to a substrate: cycling, cross-hatch, and pull-off. Both cycling and cross-hatch can only evaluate the grate of adhesion, but cannot quantify the results. The pull-off method can quantitatively describe the specific size of the adhesion, and it is clear to evaluate the adhesion of different coatings, which is very suitable for formulation developers.
Automatic Digital Pull-off Adhesion Tester is a new intelligent adhesion testing instrument developed by our company. It hydraulically tests the coating of a specific area. The whole process of pull-off is automatically performed by the instrument. Therefore, the pull-off speed is stable and controllable, avoiding the error caused by manual pressurization; the pull-off force can be accurately displayed by the digital display, and there are two different units of MPa and psi to be selected; the upper limit of pressurization can be set; after reaching the set pressure, the dwell time can be set to evaluate the durability of the sample under a certain pressure?
The instrument meets the requirements of GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1, etc. It is the first automatic pull-off tester in China and has the characteristics of simple operation, accurate data, low maintenance cost and low cost of supporting consumables. Adhesion testing between different coatings in some concrete base coats, anti-corrosion coatings or multi-coat systems.
The test sample or system is applied to a flat surface having a uniform surface thickness. After the coating system is dried/cured, the test column is directly bonded to the surface of the coating with a special adhesive. After the adhesive is cured, the coating is pulled at a suitable speed by the instrument to test the force required to break the adhesion between the coating/substrate.
It is worth noting that the tensile force of the interfacial interface (adhesion failure) or the tensile force of the self-destruction (cohesive failure) is used to indicate the test results, and the adhesion/cohesive failure may occur simultaneously.
ASTM D4541 ISO 4624 Automatic Pull-off Adhesion Tester Tests Machine Intelligent Adhesion Testing Instrument BGD500S
Main technical parameters
1.Dolly size: 20mm (standard);10mm, 14mm, 50mm (optional)
2.Resolution: 0.01MPa(1psi)
3.Accuracy: ±1% full scale
4.Pull off strength: 10mm spindle →2.8-80MPa;14mm spindle →1.4-40MPa;20mm spindle →0.7-20MPa;50mm spindle →0.4-3.5MPa;
5.Setting range of pulling rate: 10mm spindle → 0.4-6Mpa /s;14mm spindle → 0.2-3MPa /s;20mm spindle → 0.1-1.5MPa /s;50mm spindle →0.02-0.24MPa/s;
6.Power supply: built-in rechargeable lithium battery, and standard charging adapter power supply
7.Host size (L x W x H) : 240mm×138mm×81mm
8.Host weight: 4KG
9.Packaging information: 1 host machine of automatic pull adhesion tester, 20mm aluminum dolly 20pcs, 1pcs sleeve cutter, a bottle of glue, a micro-USB data line, a copy of the operation manual, a light and strong carrying case
ASTM D4541 ISO 4624 Automatic Pull-off Adhesion Tester Tests Machine Intelligent Adhesion Testing Instrument BGD500S
Audited Supplier 
){kind=link}
){kind=link}