| Customization: | Available |
|---|---|
| After-sales Service: | online |
| Warranty: | 1 year |
|
Still deciding? Get samples of US$ 1100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rapid Intelligent Sulfur Tester Coal sulfur content tester solid sulfur test machine
1.Overview of fast intelligent sulfur analyzer
KZDL-4000S double tube sulfur analyzer can be used to determine the total sulfur content in coal, steel and various minerals. The instrument is based on the standard GB214-2007, and its working principle is high temperature combustion neutralization method, that is, the sulfur in the sample is burned and oxidized in the high temperature oxygen flow to generate sulfur dioxide gas, which is completely oxidized into sulfuric acid through hydrogen peroxide solution. The generated sulfuric acid is titrated to the end point with the prepared standard sodium hydroxide solution. The percentage of total sulfur can be calculated from the amount of sodium hydroxide solution.
The instrument consists of a silicon carbon tube high temperature furnace, a thyristor temperature controller and a purification and absorption system. The instrument can perform two single sample tests at the same time.
Rapid Intelligent Sulfur Tester Coal sulfur content tester solid sulfur test machine
2.Fast intelligent sulfur tester performance features
1. Advanced single-chip automatic control, multiple corrections and processing of test data, automatic correction curve, no zero drift.
2. The furnace temperature setting can be set arbitrarily as needed through keyboard input.
3. The circuit design is modular, fault self-detection and self-reporting, automatic judgment of the test end point, rapid measurement, accurate results. And the results can be printed directly.
The new electrolytic cell design, the electrolyte does not flow back, and the glass melting plate is easy to replace.
Allows users to compensate for the measurement deviation caused by the test conditions, and can be corrected in sections, and the power outage data is not lost.
Rapid Intelligent Sulfur Tester Coal sulfur content tester solid sulfur test machine
3. Main technical parameters
| Furnace temperature | working temperature 1200ºC, furnace temperature can reach 1500ºC for a short time |
| Sulfur measurement range | 0.001%-40%, resolution 0.001 |
| Constant temperature zone | 80mm long, temperature difference less than 10°C |
| Heating speed | 20~25ºCC/min, furnace temperature can reach 1200°C within 1 hour |
| Silicon carbon tube | double thread, medium 70/60x250/100/30 |
| Reaction tube | corundum reducer, medium 22/18x760/medium 10/medium 6 |
| Controller | 0-1600ºCºC full range control |
| Power consumption | about 4 kilowatts |
| Power supply | 220V±10% 50HZ |
| Pyrometer | platinum-rhodium-platinum thermocouple, 0-1600ºCºC, accuracy level 1 |
| Pyrometer | platinum-rhodium-platinum thermocouple, 0-1600ºCºC, accuracy level 1 |
| Dimensions (length x width x height) mm | Furnace body: 760x300x410 Controller: 340x150x320 |
){kind=link}