GA- 501C Thermal conductivity tester test machine thermal diffusivity tester price ISO22007-2

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: GA- 501C
• Weight: 0-100Kg
• Power Source: AC220V
• measurement range: 1-300 (W/m k)
• Sample size: ≥Φ45×15 (mm)
• Transport Package: Plywood Case
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

GA- 501C Thermal conductivity tester test machine thermal diffusivity tester price ISO22007-2
1.Product introduction
GA-501C thermal conductivity tester is a comprehensive upgrade on the basis of GA-201C instrument, using the transient plane heat source method, the upgraded product has more powerful functions.
1. can measure the solid, powder, colloidal, anisotropic materials such as thermal conductivity, thermal diffusivity, heat storage coefficient and specific heat capacity and other indicators,
2. Single sample mode, thin sheet sample mode, film sample mode and uniaxial sample mode are added, which are suitable for testing samples of different sizes and forms.
3. It can support the use of two different sizes of test probes, which is convenient to select different sizes of samples under the premise of ensuring test accuracy.
This instrument is based on TPS transient plane heat source technology, using Hot Disk as the probe thermal conductivity measuring instrument.
GA- 501C Thermal conductivity tester test machine thermal diffusivity tester price ISO22007-2
2.The advantages of the Hot Disk method
(1) Direct measurement of heat propagation can save a lot of time;
(2) It will not be affected by the contact thermal resistance as the static method;
(3) No special sample preparation is needed, only a relatively flat sample surface is required.

Product Parameters

Thermal conductivity measurement range	0.0100-300W /m k
Resolution	0.0001W /(m·K)
Measurement time	5-1200 seconds
Accuracy	better than 5%
Temperature range	Standard measurement: room temperature optional sample temperature controller: room temperature ~ 130ºC, optional constant temperature experiment box, the cost of additional
probe configuration	standard Φ15mm probe, the instrument supports 2 probes Optional Φ7.5mm probe, the cost is additional
Power supply	220V
Power	200W

GA- 501C Thermal conductivity tester test machine thermal diffusivity tester price ISO22007-2
4. Measurement mode
4.1 Standard measurement: block sample (double sample) mode (with Φ15mm probe)
4.1.1 Thermal conductivity measurement range: 0.0100-300 (W/m k);
4.1.2 Thermal diffusivity measurement range: 0.05 -- 10 (mm2/s);
4.1.3 Sample size: ≥Φ45×15 (mm), greater than 20 W/m k, according to the software size
4.2. Extended Measurement
4.2.1 Block sample (single sample) mode
4.2.1.1 thermal conductivity measurement range: 0.0100-300 (W/m k)
4.2.1.2 Sample size: ≥Φ45×15 (mm)
4.2.2 Sheet sample mode
4.2.2.1 thermal conductivity measurement range: 1-300 (W/m k)
4.2.2.2 Sample size: effective measurement area ≥Φ45, thickness 1-10 (mm)
4.2.3 Film like mode
4.2.3.1 Thermal conductivity measurement range: 0.0100-10 (W/m k)
4.2.3.2 Sample size: effective measurement area ≥Φ45, thickness 0.01-1.00 (mm)
4.2.4 Uniaxial heterotypic pattern
4.2.4.1 thermal conductivity measurement range: 0.0100-300 (W/m k)
4.2.4.2 Sample size: ≥Φ45×15 (mm)
Easy to operate, fast test, just put the test probe in the middle of two sample blocks, through a simple software click operation can be obtained thermal conductivity of the test sample.
Instrument configuration: including 1 GA-501C test host, 1 Φ15mm test probe, 1 set of test software, 1 set of communication interface and data line, 1 sample fixture, 1 computer. If you need to choose the thermostat device and small size probe, the cost is extra.
 

Detailed Photos