Product Description
Ring Crush Tester Paper crushing strength testing instrument Paper and cardboard Automatic Compression Testing Machine
Test standard
GB/T 2679.8 determination of ring compression strength of paper and paperboard(sample area: 152.4×12.7mm)
GB/T 6546 "determination of corrugated board edge pressure strength";(sample area: 25mm×100mm)
GB/T 6548 "determination of adhesive strength of corrugated board";(sample area: 25mm×80mm)
GB/T 2679.6 determination of flat compression strength of corrugated base paper;(sample area: 64.5cm2/32.2cm2)
Introduction
Microcomputer compression strength tester is a touch screen controlled paper and board compression strength tester, which is used to test paper ring pressure strength, cardboard edge pressure strength, corrugated board bonding strength, corrugated board compression strength and so on.Paper mills are usually used to test the RCT of paper with a thickness of 0.15 ~ 1.00mm.Cardboard, carton factories and carton enterprises are commonly used to test corrugated board edge compression strength (ECT), flat compression strength (FCT), bonding strength (PAT) and flat compression strength (CMT) with diameter less than 60mm.This instrument is an ideal auxiliary test tool for paper making enterprises, paperboard manufacturers, carton manufacturers, carton users and quality supervision and inspection departments.
Ring Crush Tester Paper crushing strength testing instrument Paper and cardboard Automatic Compression Testing Machine
Product Parameters
Ring Crush Tester Paper crushing strength testing instrument Paper and cardboard Automatic Compression Testing Machine
Technical Parameters
| Capacity |
100kg, 200kg, 300kg(optional)
|
Degree of decomposition
|
1/10,000
|
Accuracy
|
≤±0.5%
|
Display mode
|
LED display
|
Pressure plate
|
100cm2 or depending on the diameter of the flat pressure sample
|
Compression spacing
|
80mm
|
Platen parallelism
|
Platen parallelism
|
Ring pressure sample
|
152×12.7mm
|
Side pressure sample
|
25×100mm
|
Test speed
|
12.5±2.5mm/min
|
External size
|
(L×W×H)430×400×600mm
|
Weight
|
40kg
|
Power source
|
1∮ AC220V, 1.5A
|
Application:
carton, paper, corrugated board, color box, plastic hollow board, small carton, small paper tube
RCT - Ring Crush Test : A sample of paper or cardboard is placed in a ring formation and subjected to a successively increasing edge compression force until it breaks,then the resistance force is measured. The RCT value is the force divided by the sample's length.
Applicable standards:GB/T2679.8 APPITA/AS 1301.407s, PAPTAC D.33P, DIN 53134, ISO 12192, JIS P8126, SCAN P 34, TAPPI T 822
CLT - Concora Liner Test measures the same way as RCT, but is carried out in another type of sample holder.
CCT - Corrugated Crush Test: A sample is corrugated between heated corrugating rolls. The sample is fixed in a special jig that is adapted to the corrugated shape. The crushing force is applied and measured par allel to the top of the corrugating medium. The CCT value is the maximum force that the sample can withstand before it breaks.
Applicable standards:SCAN P 42, TAPPI T 843
CMT - Concora Medium Test: A sample is corrugated between heated corrugating rolls. The flute is fixed and held together by a pressure-sensitive tape, so that single-sided corrugated board is imitated. The crushing force is applied vertically to the paper ,then the breaking force is measured. The CMT value is the maximum force the sample can withstand before it breaks.
Applicable standards:GB/T2679.6 APPITA/AS 1301.434s, PAPTAC D.24P, DIN 53143, EN ISO 7263, ISO 7263, SCAN P 27, TAPPI T 809
FCT - Flat Crush Test : A sample of corru gated board is subjected to vertical increasing force until the fluting breaks. The FCT value is the force divided by the sample's surface area.
Flat Crush Hardness - A measurement of the corrugated board's yield point in a FCT sample. Equivalent to the first 'peak'.
Flat Crush Energy - The total energy absorbed during a FCT measurement.
Applicable standards:GB/T22874 APPITA/AS 1301.429s, EN 23035, FEFCO No.6, ISO, 3035, SCAN P 32, TAPPI T 825
ECT - Edge Crush Test: A sample of corru gated board is subjected to increasing force, parallel to the flutes, until it breaks. The ECT value is the breaking force divided by the sample's width.
Applicable standards:GB/T6546 APPITA/AS 1301.444s, DIN 53149, EN ISO 3037, FEFCO No.8, ISO 3037, ISO 13821, SCAN P 33, TAPPI T 811, T 823,T 838, T 839
PAT - Pin Adhesion Test:Adhesion resistance is the maximum force required to separate the linerboard from the fluting with the help of a special sample holder.
Applicable standards:GB/T6548 APPITA/AS 1301.430s, TAPPI T 821
SQT - Score Quality Test:A sample is placed on a U-shaped support and pressed by a thin strip, exactly above a score, until it breaks. The ratio between the scored and un-scored values gives the score ratio.
Applicable standards:TAPPI T 829
CL-Constant Load Test:The test load, speed and time are input to test the deformation of the sample under constant load and specified time.
DL-Deformation Load Test:Input deformation and test speed, test the maximum load of the sample.
Ring Crush Tester Paper crushing strength testing instrument Paper and cardboard Automatic Compression Testing Machine
Detailed Photos
Ring Crush Tester Paper crushing strength testing instrument Paper and cardboard Automatic Compression Testing Machine
Audited Supplier 
){kind=link}