Customization: | Available |
---|---|
After-sales Service: | Online |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Multifunctional coating machine Rolling System Coating Machine Coater Lab Automatic Vacuum Film Coater
1.Use
MSK-AFA-400 multifunctional coating machine, roll-to-roll mode, continuous coating and intermittent coating, width 400mm, coating width 50-360mm, modular head structure, optional extrusion coating, transfer coating, blade coating, micro-gravure coating, extrusion + transfer coating, extrusion + blade coating, extrusion + micro-gravure coating, transfer + micro-gravure coating, blade + micro-gravure coating, extrusion + transfer + micro-gravure coating, extrusion + blade + micro-gravure coating, multifunctional coating by changing the substrate threading square to switch the coating function, optional extrusion coating mold, 150ºC hot air oven, unwinding correction + rewinding correction function, unwinding tension + rewinding tension two-stage tension control, optional standard drying oven and arc drying oven length (1m, 1.5m, 2m) and quantity (1 section, 2 sections, 3 sections, etc.), feeding device, NMP monitoring, box pressure monitoring, NMP treatment, etc.
Power supply | Three-phase five-wire AC380V±10%, frequency 50Hz, power 30KW | |
Air supply | 0.5-0.8MPa compressed air | |
Coating method | Extrusion coating, transfer coating | |
Guide roller width | 400mm | |
Substrate width | Max.380mm | |
Extrusion coating | Coating type | Continuous coating, intermittent coating |
Slurry system | Positive electrode oil-based slurry (lithium cobalt oxide, lithium iron phosphate, lithium manganese oxide, ternary), negative electrode water-based slurry (graphite, silicon-based negative electrode), supercapacitor slurry | |
Coating die head | Brand: Domestic Type: Micrometer adjustable Gasket: 1 set of gaskets (3 pieces) is provided as standard, thickness and opening size are specified by the customer |
|
Coating steel roller | Ф120mm, chrome-plated surface | |
Coating length | Coating length 10~5000mm, blank length 10~500mm | |
Alignment on both sides | ±0.5mm (length direction) | |
Intermittent valve body | Pneumatic control | |
Pressure monitoring | Optional | |
Die head movement | Motor adjustment | |
Transfer coating | Coating type | Continuous coating, intermittent coating |
Slurry system | Positive electrode oil-based slurry (lithium cobalt oxide, lithium iron phosphate, lithium manganese oxide, ternary), negative electrode water-based slurry (graphite, silicon-based negative electrode), supercapacitor slurry | |
Coating width | 50~360mm, adjustable by baffle | |
Coating steel roller | Ф120mm, chrome-plated surface | |
Coating rubber roller | Ф120mm, EPDM surface | |
Coating scraper | Ф100mm, chrome-plated surface | |
Scraper adjustment | Motor adjustment | |
Coating length | Coating length 10~5000mm, blank length 10~500mm | |
Alignment of both sides | ±0.5mm (length direction) | |
Material box capacity | About 2L (coating width 360mm) | |
Guide roller | Diameter Ф60mm, aluminum roller surface hard anodized | |
Drying box | Single section 1.5m, 3 sections in total (hot air drying as standard) | |
Drying temperature | Max.150ºC±5ºC (except working position, head and tail and oven connection), adjustable | |
Air inlet | 1 unit per section, centrifugal fan, interface: Ф120mm (5-inch aluminum foil air duct) | |
Exhaust | Total 1 unit, centrifugal fan, interface: Ф145mm (6-inch aluminum foil air duct) | |
Heating box | Single section contains 9 U-shaped heating tubes, each with 1KW | |
Tension control | Max.80N | |
Reel diameter | Max.Ф300mm | |
Reel core | 3-inch expansion shaft | |
Operation direction | Along the foil transfer direction, the right side is the operating side | |
Equipment size | Coating machine: about L6550xW1200xH2000mm Feeding device: about L780xW230xH810mm |
|
Weight | Coating machine: about 2.4t Feeding device: about 68Kg |