Cylinder Tumble Impact Tester Fire Extinguisher Cylinders Tipping Impact Test Machine Tumbling Drop Test Equipment

• Customization: Available
• After-sales Service: Online
• Warranty: 1 year
• Model NO.: GA-Y130
• Type: Cylinder Tumble Impact Tester
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Wooden Package
• Trademark: GONOAVA
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Cylinder Tumble Impact Tester Fire Extinguisher Cylinders Tipping Impact Test Machine Tumbling Drop Test Equipment

I. Scope of Application:
1.1 Applicable to the tipping impact test of various fire extinguisher cylinders.
1.2 Mount the fire extinguisher cylinder on a workbench and secure it with a clamp and steel pad. Slowly apply a horizontal force F to the cylinder container, causing it to tip without any resistance, and the cylinder valve to impact the mild steel rod. Fire extinguisher cylinder parts must not become loose, fall off, or be damaged. After the test, the fire extinguisher cylinder assembly is tested for airtightness. Both the automatic and manually activated container valves should open normally.

II. Standards:
2.1 Complies with Section 6.14 of GB25972-2010, "Gas Fire Extinguishing Systems and Components," regarding the cylinder assembly tipping impact test.
2.2 Complies with Section 6.14 of GB16669-2010, "General Technical Requirements for Carbon Dioxide Fire Extinguishing Systems and Components."

Cylinder Tumble Impact Tester Fire Extinguisher Cylinders Tipping Impact Test Machine Tumbling Drop Test Equipment

Product Parameters

Cylinder Tumble Impact Tester Fire Extinguisher Cylinders Tipping Impact Test Machine Tumbling Drop Test Equipment

Technical Requirements:
3.1 Machine Dimensions: L2300mm*W700mm*H1400mm;
3.2 Mild Steel Rod: 50mm diameter, 350mm length;
3.3 Rigid Pad: Made of steel columns, raised at a 10° angle. 3.4 Angle Ruler: Before testing, measure the tilted bottle assembly to a 10° angle (calibration angle).
3.5 Applicable Bottle Assembly: Maximum Diameter: 350mm, Maximum Height: 1500mm, Minimum Diameter: 80mm, Minimum Height: 320mm.

 

 

 

Company Profile